TIFIX
Tile Fixing Adhesive
- product data sheet
- download data sheet
Properties:
TIFIX is an economic polymer modified powder adhesive prepared with high quality raw materials for superior bonding. TIFIX is resistant to water and freeze-thaw-changes.
Areas of Application:
TIFIX is used as tile adhesive for tiling of ceramic materials (thin bed method). Natural stone material can be bonded with TIFIX, however, the specific properties of the products are to be considered. It is suitable for adhesive for construction boards of gypsum plaster, gypsum cellulose and polystyrene.
Storage:
Dry.12 months, open bags are to be used up as soon as possible.
Technical Data
- Basis: sand/cement
- Color: cement grey
- Filler composition: fine sand
- Bulk density: 1.3– 1.4kg/l
- Application temperature: +5°C upto 30°C
- Pot life: approx. 2 hour
- Jointable: after 24 hrs
- Traversable: after 24 hrs
Product Details
Product Preparation
TIFIX is to be mixed with tap water in a clean vessel until a knot-free pasty mortar is obtained.
Mixing ratio: 7 liter water to 25 kg TIFIX After a short maturing time, it is mixed again being used within the next hour. The mortar is applied continuously on the surface and scraped with a serrated trowel. Do not cover more surface than required, keeping within the working time of 15 minutes. The tiles are fixed with light pressure. Light weight building materials like gypsum card-boards or other suitable boards are bonded to vertical surfaces by the spot fixing method.
Surface Preparation
The surface has to be dry or slightly moist, load bearing, free from dirt, dust or parting agents. Prime absorbent surfaces with Acryseal WB. Smooth concrete surfaces have to be roughened, anhydrite screed has to be grinded, vacuumed and primed with Acryseal WB.