Products >Tile & Natural Stone Laying >Smoothing Compound >SOLOPLAN® – 30

SOLOPLAN®-30

Self levelling underlayment up to 30 mm

Properties:

  • polymer modified
  • self levelling
  • waterproof
  • low emission
  • for exterior and interior use
  • easy to process
  • fast curing
  • suitable for heated screeds
  • pumpable
  • for layers 3 – 30 mm thick
  • meets class RWFC-550 according to DIN EN 13892.7

Areas of Application:

SOLOPIAN-30 is used for smoothening and levelling in layers of 3 – 30 mm thick. Suitable surfaces are floors made of concrete in accordance to German Industrial Standard DIN 1045, heated and unheated cement screeds according to DIN 18560, old hardened tile surfaces and rapid hardening cement
screeds {for example ASODUR-EZ6 Plus}.
SOLOPLAN-30 is suitable for exterior areas and areas subject to moisture loads, provided a suitable SCHOMBURG compound waterproofing sealant has been applied in advance. Other than the already planned surface, it is not suitable as a wearing surface without additional coating!

Storage:

Dry, 6 months in originally closed packs, opened packs are to be sealed and be used up as soon as possible.

Technical Data

  • Basis: cement, aggregates, additives
  • Color: grey
  • Bulk density:1.4 kg/dm3
  • Application and surface temperature: +5° C up to +25° C
  • Pot Life: 30 minutes
  • Traversable: after approx. 4 hours
  • Compressive strength: Approx. 14 N/mm2 after 24 hours
    Approx. 28 N/mm2 after 7 days
    Approx. 38 N/mm2 after 28 days
  • Tensile strength in bending: Approx. 2.8N/mm2 after 24 hours
    Approx. 7.5 N/mm2 after 7 days
    Approx.8.0 N/mm2 after 28 days
  • Classification: EN 138 1 3 CT-C30-F7
  • Fire behavior rating: A2
  • Cleaning: in fresh condition with water
  • Consumption: approx. 1,65 kg/m2/mm layer thickness
  • Packaging: 25 kg-bags with PE-liner

Product Details

Product Application:

Product Preparation

The surface is to be dry, of load bearing capacity, hardened, be skid-proof and be free from substances acting as separating agents. The surface has to meet the load carrying capacity requirements as specified in DIN 1055. Separating and sintering layers have to be removed by suitable measures such as blasting or milling. Cement screeds on separating or insulating layers the coating maturity is to be measured using the CM-device prior to application of SOLOPLAN-30, this avoids further deforming of the screed plate caused by shrinking. The temperature of air and ground surface must not fall below +5° C during and one week after application.