MULTIFIX-2C

MULTIFIX-2C is used as a thin bed adhesive especially for the installation of vitrified tiles with lower water absorption < 0.5% (fully vitrified), vitrified tiles, clinker and mosaic onto ‘green’ cement-based substrates. The high deformability of MULTIFIX-2C can largely compensate for the damaging shear stresses in the tiled finish and is therefore also especially suitable for the installation of large format tiles. MULTIFIX-2C is used primarily in floor areas. MULTIFIX-2C is especially suitable for use on balconies and terraces, in swimming pools and containers, on heated constructions, on ‘green’ heavier duty cement based substrates and for the installation of tiles with lower water absorption. Due to its high elasticity high stresses are also reliably accommodated with MULTIFIX-2C such as those that arise e.g. between substrate and tiled finish in exterior areas or when installing on ‘green’, trafficked cement based screeds (approx. 3 days after laying) and heated screeds. The vapour permeability of MULTIFIX-2C guarantees that cement-based substrates, which are still damp, will dry out even when installing tiles early. The mandatory commissioning of heated screeds before the installation of ceramic materials can be omitted. When installing natural stone materials make allowances for the specific product properties of the natural stone, sensitivity to discolouration and curling. MULTIFIX-2C is a system component of the bonded tiled waterproof system AQUAFIN-2K/M + MULTIFIX2C. MULTIFIX-2C is suitable for use on mineral-based and dispersion-based SCHOMBURG bonded waterproof systems.

Dry, 12 months frost free, 12 months in the original unopened container

• Basis: aggregate, cement, liquid polymer additives
• Colour: grey white
• Mixing ratio: 3 parts by weight 1 part by weight
• Application/substrate temperature: +5 °C to + 25 °C
• Cleaning: with water immediately after use