ASOLIN-WS
Siloxane Impregnation
- product data sheet
- download data sheet
Properties:
ASOLIN-WS is a solvent-containing construction chemical based on oligomere siloxanes for a colourless and water repellent impregnation of mineralic construction materials. ASOLIN-WS is ready for use. ASOLIN-WS is applied onto the construction material and absorbed by capillarity. It is transformed into the water repellent siloxane under the influence of moisture. Water repellant characteristics of surfaces treated with ASOLIN-WS are resulting in significant protection against damages caused by frost and salts.
Areas of Application:
ASOLIN-WS is recommended for moisture protection of facades or strongly inclined areas. Test on objects before use. General remarks concerning impregnation of different construction materials with ASOLIN-WS:
Excellent: Porous concrete, bricks, lime sand stone, mineralic plaster, mineralic paint
Good: Concrete, cement bonded artificial stone, asbestos cement
Different: Natural stone
Limited suitability: Plastic resin plaster
Not suitable: Gypsum, plastic resin paints
Storage:
12 months in closed packs.
Technical Data:
- Basis: Oligomere siloxane with arge alykl groups.
- Colour:colourless
- Specific Gravity: approx 0.78 g/ml
- Cleaning: Clean tools immediately after use with AQUAFIN-Cleanser.
- Consumption: between 100 – 1,000 ml/m2
Product Details
The dry or slight moist surface
The dry or slight moist surface has to be in a flawless condition. Defects have to be removed in advance. Water and in water soluble material may not get behind the hydrophobized area. If damaging salts are existing a laboratory analysis is necessary. The impregnated construction materials have to be open-cell. (Priming with ASO-Steinreiniger). Adjoining areas like windows, painted areas or areas to paint or glass has to be protected with a PE-foil as well as plantation. Construction parts which will be affected by solvents like polystyrene, mastix, bitumen, latex must not be treated with ASOLIN-WS.
The ready for use ASOLIN-WS is applied onto the construction
The ready for use ASOLIN-WS is applied onto the construction material by means of spraying and brushing. Application is effected in one or several layers that all have to be saturated and even. Generally, the surface is to be impregnated twice wet in wet. Best impregnation effects are achieved on slightly moist and absorbing surfaces.