Products >Waterproofing System >Flexible Cementitious Waterproofing Coating >AQUAFIN® – TC07

AQUAFIN® -TC07

2-comp, polymer-modified waterproofing mortar

Properties:

AQUAFIN-TCO7 is 2-comp., polymer modified, cement based protective waterproofing material for concrete, masonry, render or screeds against penetrating moisture

Areas of Application:

AQUAFIN-TCO7 is used as a waterproof coating on wall and floor surfaces, water containers, foundations etc. against positive and negative water pressure. It is for treatment of substrates with no risk of cracking and without excessive movement.

Advantages:

  • Seamless and joint free flexible protective coating
  • Suitable for all load-bearing substrates conventional in construction
  • Hydraulically curing
  • Very easy application – apply with a brush, trowel or suitable spray equipment
  • Vapour permeable, resistant to frost, de-icing salts  and aging
  • UV stable
  • High abrasion resistance
  • Impermeable to water up to 5 bar
  • Resistant to solutions aggressive to concrete according to DIN 4030

Technical Data

  • Basis: 2-comp., cement-based powder and liquid dispersion.
  • Colour: Grey powder, white liquid.
  • Density of Fresh: Approx.   2.0kg/dm3 Mortar.
  • Mixing ratio slurry Spray: 1:4 liquid: powder by weight
  • Mixing ratio trowel: 1:4.5 liquid: powder by Weight
  • Mixing: Approx. 2-3 minutes.
  • Pot life +23°C: Approx. 45 minutes.
  • Pot life +35°C: Approx. 30 minutes.
  • Substrate/Application temperature: Min. approx. +5°C, to max. approx. +35°C. Lower temperatures extend, and higher temperatures reduce curing times.
  • Adhesion strength: approx. 1.0 N/mm2(ASTM D 4541:2002)
  • Flexural/compressive strength: 10 / 40 N/mm2 at 28 days
  • Tensile strength: 8 N/mm2(ASTM D 412.98a)
  • Elongation: 10% (ASTM D 412:98a)
  • Crack bridging: 0.41 mm (ASTM C 836:95)
  • Abrasion resistance: 311 mg (ASTM D 4060:01)
  • Water permeability: Nil at 5 bar (BS EN 12390)
  • Initial surface absorption: Nil (BS 1 881 Part 208:96)
  • Shore ‘D’: D/80/1 (ASTM D 2240:05)
  • Rapid chloride permeability: < 5% reduction (ASTM-C 1202.97)

Product Details

Product Storage:

Storage

Powder Component: cool and dry, 6 months

Liquid Component: Frost-free, 12 months in the original unopened packaging, use opened packaging promptly. NOTE: the liquid component is sensitive to frost. When the ambient temperature is >35° C the materials must be stored under climatised conditions.