AQUAREP
Penetrating Water Repellant
- product data sheet
- download data sheet
Description:
AQUAREP is a highly effective waterproof agent developed to provide water repellency for porous construction materials such as aerated block, ceramic tile, building insulation material and concrete cement, mortar, concrete, light weighted composite construction material etc.
The penetrate deeply into the substrates and bond active ingredients which is nano-size with them, form penetration protective layer on the surface. With the super low surface tension, it boosts excellent water repellency and fast beading action.
Areas of Application:
For use on cementitious substrates such as concrete and mortar that require water repellency. Such as all type of concrete cement for bridge infrastructure, port, pier, airport apron, highway pavement, overpass, parking lot, warehouse, refrigerated warehouse, city square, garage, building internal & external walls finishing and roof covering etc.
Advantages:
- Stronger chemically bonded, long-lasting protection, good durability, good stability,extend the lifespan of building material obviously
- Good penetration into porous substrates, good abrasion resistance
- Resist water vapor, moisture, and liquid water into the substrate
- One-way breathable, repair tiny crack(0 .2mm-0.4mm)
- Quickly for using and quick dry
- Especially perform well on high density concrete
- Chemical resistance such as acid, alkali, chloride io n, carbonation, weather, UV resistance -Excellent
- Frostproof, anti-freezing and thawing g and resist low/high temperature (-50°C-200°C）
- Does not change original appearance
- Environmentally friendly
Technical Data:
- Remarks: Curing in lab, 25°C
- Appearance: Colorless
- Odor: Slight Odor
- Specific Gravity: 0.80 + 0.01 g/|
- pH Value: 6-7
Product Details
AQUAREP is ready to use penetrating water repellent
- Material surface must be clean and dry.
- Spraying, brushing, soaking or rolling are suitable for this application. Please apply under the condition of natural ventilation.
- Spray with suitable low pressure, 10-15cm distance away.
Apply the material on substrate until it's thoroughly saturated
- Apply the material on substrate until it’s thoroughly saturated. For middle or high-density substrate, it needs to wipe up excess liquid with soft cloth after apply for 5-10 minutes.
- Don’t put treated material to moisture or rain place, and dry in natural air. When the surface is dry, further treatment can be followed.
- After completely curing, it will achieve an outstanding hydrophobic effect.
- Apply when the temperature is between 2°C-45°C (35.6-113°F).