Hardtop T100 SL
Industrial Floor Leveller
- product data sheet
- download data sheet
Product Description:
Hardtop T100 SL is a rapid hardening, cementitious, quick-drying, self-levelling leveller designed to resurface concrete floors. Hardtop T100 SL produces a high strength and wear resistant surface finish suitable for commercial and industrial areas including warehouse floors, parking garages, production and utility areas. Hardtop T100 SL can be walked on after approximately 6 hours and subjected to traffic after 48 hours.
Advantages:
- Ideal for creating wear surfaces for heavy-duty applications.
- Easy to install – 10mm to 100mm thickness in one application.
- Quick drying – Walkable in 6 hours.
- Superior flow – Fast application.
- Usage – Power mix and Manual application
- Suitable for Residential, Commercial and Industrial applications
Substrates:
Hardtop T100 SL is designed for installation over dry internal / external concrete subfloors.
Surface Preparation:
Concrete floors must be solid, clean and free of wax, grease, asphalt, latex compounds, curing and sealing compounds and any other surface contaminates. Mechanically prepare the floor using recommended preparation methods such as shot blasting, scarifying, diamond grinding, shaving or other suitable methods to provide a roughened, clean, sound, solid and open porous surface.
Acid etching is not an acceptable method of cleaning the subfloor. Do not use solvents or sweeping compounds.
Subfloors must be dry and properly primed for a successful installation. Subfloor temperatures must be a minimum of 10°C.
For further information, contact AQUAFIN Technical Services.
Product Details:
Priming:
Use ASO® Unigrund-P over standard concrete floors prior to the installation of Hardtop T100 SL levelling compound. Mix 1-part ASO® Unigrund-P with 1 parts water and apply evenly using a push broom. Do not use paint rollers, mops, or spray equipment. Do not leave any bare spots. Brush off all puddles of excess primer. Allow drying to a thin, clear film (min. 3 hours, max. 24 hours). Very absorbent concrete may require two applications of primer to avoid pinholes and bubbling in the levelling compound. In such cases, make the initial coat 1-part ASO® Unigrund-P diluted with 2 parts water. Allow to dry and install a second coat of 1-part ASO® Unigrund-P diluted with 1 part water. Allow drying to a thin, clear film (min. 3 hours, max. 24 hours).
Note: Low subfloor temperatures and/or high ambient humidity require longer drying time. Do not install levelling compound until primers have dried thoroughly.
Technical Data:
- Powder bulk density: 1.5 kg/litre
- Mixed mortar density: 2.4 kg/litre
Compressive Strength
- After 1-day: approx. 16 N/mm2
- After 7 days: approx. 24 N/mm2
- After 28 days: approx. 45 N/mm2