Products >Concrete Technology >Concrete Waterproofing Admixture >BETOCRETE®-CP-350-CI

BETOCRETE®-CP-350-CI

CRYSTALLINE CONCRETE ADDITIVE WITH CORROSION INHIBITORS

Properties:

BETOCRETE®-CP-350-CI is a powder-based admixture for designing a watertight concrete with innovative 2-in-1 technology. Nano-crystals are formed in the capillaries by special catalysts, which become active in contact with water forming a sustainable and permanently water-impermeable concrete. In addition, reinforcing steel is protected against corrosion.

  • Powder based.
  • Innovative 2 in 1 technology.
  • Crystallization of the capillaries.
  • Crack healing is possible for penetrating cracks up to 0.4 mm and for map/pattern cracks up to 0.5 mm.
  • Corrosion inhibitor.
  • Improvement of the resistance to freeze/thaw.
  • Reduction in chloride migration.
  • Protects reinforcement from corrosion.
  • Minimization of maintenance and repair costs.
  • Time-savingng.

Areas Of Application:

BETOCRETE®-CP-350-CI can be applied to all concrete where water penetration should be permanently prevented. They are for example:

Cooling towers at power stations, tanks and containers, retaining basins, swimming pools, parking garages, parking lot levels, foundations, sandwich units, waterproof concrete, sewer channels/manhole access points, tunnels, Concrete pipes and everywhere, where water tightness is needed.

Advice:

  • Dependent on the composition, concrete modified with BETOCRETE®-CP-350-CI can feature crystals on the surface of the concrete.
  • Carry out preliminary trials in accordance with current standards before using BETOCRETE®- CP-350-CI or other types of additives- when using 3 kg water-soluble paper bags, be aware that the water demand might increase.
  • Lignite fly ash is only suitable with restrictions.
  • The use of CEM III /B&C cements is excluded.
  • Concrete with BETOCRETE®-CP-350-CI must be produced, installed and cured following current valid standards.

Technical Data:

  • Color:grey.
  • Consistency :powder.
  • Bulk density:1.12 g/cm3.
  • Application temp:≥ ±5°C.
  • StorageDry, 12 months in the original unopened container. Use opened containers promptly.
  • Packaging3 kg water-soluble paper-bag 20 kg foil bag.
  • Concrete requirementsCEM I 270 kg/m3, CEM II 290 kg/m3, CEM III/A 350 kg/m3

This applies to all exposure classes expect for XA3 in accordance with DIN EN 206-1/ DIN 1045-2. BETOCRETE®-CL210-WP shows the highest
efficacy in exposure class XS.

Product Details