UNIFIX is a tile adhesive. UNIFIX is used as a thin bed adhesive for the installation of vitrified and earthenware tiles, clinker, mosaic and natural stone materials with high water absorption, which are not sensitive to discoloration or translucent. UNIFIX is suitable for an assured installation to all substrates in accordance with DIN 18157, part 1 e.g., concrete, aerated concrete, render, plaster, cement-based and calcium sulphate-based screeds / heated screeds, masonry work, plasterboard etc. It is also suitable as an adhesive for lightweight construction boards e.g., those made with extruded polystyrene and for the installation of tiles onto mineral-based and dispersion-based SCHOMBURG bonded waterproof membranes in wet duty class A0 in accordance with the ZDB data sheet “bonded waterproof membranes”.

TIFIX is an economic polymer modified powder adhesive prepared with high quality raw materials for superior bonding. TIFIX is resistant to water and freeze-thaw-changes.

SOLOFLEX is a high-quality polymer-modified thin bed adhesive, according to EN 12004, resistant to water and freeze thaw changes. SOLOFLEX is stable and easily workable, SOLOFLEX is suitable for wall and floor areas. SOLOFLEX is suitable for interior and exterior use.

MULTIFIX-2C is a highly flexible thin bed adhesive. MULTIFIX-2C is used as a thin bed adhesive especially for the installation of vitrified tiles with lower water absorption ≤ 0.5% (fully vitrified), vitrified tiles, clinker and mosaic onto ‘green’ cement-based substrates. The high deformability of MULTIFIX-2C can largely compensate for the damaging shear stresses in the tiled finish and is therefore also especially suitable for the installation of large format tiles. MULTIFIX-2C is used primarily in floor areas.

MONOFLEX is a high grade, polymer-modified, thin bed adhesive, tested and supervised according to EN 12004, for interior and exterior applications. MONOFLEX is easily workable, with a high initial bond and has very good stability. Due to its flexible form, application is also suitable on weak deformable surfaces.

AK7P is a plastic-modified thin bed adhesive according to Standard EN 12004, for interior and exterior application. AK7P is simple to use, with a high initial bond and very good stability. AK7P is used as tile adhesive in a thin layer method for ceramic coatings, mosaic, clinker and brick tiles. We recommend AK7P for natural stone tiles as long as the specific properties of the natural stone are considered. AK7P is suitable as tile adhesive on construction boards from wood wool, gypsum boards, gypsum fibers and extruded polystyrene.