INDUGROUT-PH is a ready-to-use high performance, high strength, non-oxidized, non-shrink, cementitious grout which only requires the addition of water to produce a non-shrink flowable mortar. INDUGROUT-PH contains a blend of selected Portland cements, special aggregates, modifiers and shrinkage compensating materials that work during both the plastic & post hardened states. INDUGROUT-PH is designed for application by pouring or pumping in thicknesses between 10 mm & 80 mm. INDUGROUT-PH does not release any gases during its plastic or hardened states.

INDUGROUT-MC is a ready-to-use high performance, high strength, non-oxidized, non-shrink, cementitious grout which only requires the addition of water to produce a non-shrink flowable grouting mortar for large gap filling. INDUGROUT-MC contains selected Portland cements, selected hard aggregates, modifiers and shrinkage-compensating materials that work during both the plastic & post hardened states. INDUGROUT-MC is designed for application by pouring or pumping in thicknesses between 12 mm & 300 mm.

INDUFLOOR-IB-SL3000 is 3-component, solvent-free (100 % solids), self-smoothing & levelling, epoxy resin-based high- build, high performance, chemical & abrasion resistant seamless protective floor coating with dry film thicknesses between 1.0 mm and 3.0 mm. After curing the applied material provides a durable, easy-to-clean, protective, sealing & decorative topping with excellent abrasion & impact resistant properties. INDUFLOOR-IB-SL3000 is based on selected epoxy resins & special hardeners and hard-wearing fillers. INDUFLOOR-IB-SL3000 is available in a select of RAL shades.