Products >Waterproofing System >Crystalline Waterproofing >INTEGRACOAT – Crystalline Waterproofing Coating

INTEGRACOAT – Crystalline Waterproofing Coating

Properties:

INTEGRACOAT is a state-of the art one component, penetrating cementitious material which waterproofs and protects new or old structurally sound concrete. It resists strong hydrostatic pressure and is not a vapor barrier (allows concrete to “breathe”). INTEGRACOAT is powered by Aquafin’s advanced crystalline technology which chemically reacts with moisture and free lime to reduce the water absorption of the resultant cement matrix within the concrete. This is a result of the formation of nano-scale crystals by the active catalysts present in the capillary system. This sustains a durable waterproof effect in the concrete, thereby blocking the passage of water. This reaction will continue to take place anytime water is present for the life of the concrete structure where by making the INTEGRACOAT a truely permanent and integral waterproofing solution. The INTEGRACOAT nano crystals will also grow in and along static hairline crack sealing them and preventing further incoming water.

Advantages:

  • Advanced crystalline technology that penetrates deep into concrete
  • Potable water approved
  • Applied to moist (damp) substrate
  • Environmentally friendly, norganic – non toxic, zero VOC’s
  • Permanently active
  • Easy to use – needs only water for mixing
  • Can be applied to green concrete as soon as forms are stripped
  • Protects concrete against fresh water, salt water, waste water & aggressive ground water
  • Resists strong hydrostatic pressure
  • Applied to positive or negative side water pressure
  • Seals and post seals shrinkage cracks, up to 1/64” (0.4 mm)
  • Contains no chlorides
  • Cost effective Crystalline

Storage:

INTEGRACOAT must be stored in a dry enclosed area off the ground. Shelf life in unopened, dry undamaged bags or pails is 12 months. Note: Installer is responsible for proper product application. Site visits by Aquafin personnel or representatives are solely for the purpose of making technical recommendations, not for providing supervision or quality control.

Technical Data

  • Aggregate State: powder
  • Color: Cement gray
  • Pot Life: 30 minutes
  • Setting Time: 45 minutes
  • Potable Water safe

Product Details

Product Brush Application:

Brush Application

Apply two coats of INTEGRACOAT, in the specified quantity, in a slurry consistency with a masonry brush. Brush on the material evenly and work it well into the surface. Apply second coat while the first coat is still tacky (“green”).

Product Spray Application:

Spray Application

INTEGRACOAT may be applied using appropriate compressed-air spray equipment. Spray on one or two coats, according to the specification, in circular movements. Apply second coat while first coat is still tacky (“green”).