Products >Protective Flooring / Coating Systems >Epoxy Flooring >INDUFLOOR-IB3359

INDUFLOOR-IB3359

2-Component, Pigmented, Solvent-Free, Multi-Finish (slip-resistant, anti-skid and textured), Chemical And Abrasion Resistant, Epoxy Floor Coating

Properties:

INDUFLOORIB3359 is 2-component, solvent-free, pigmented, epoxy resin-based chemical and abrasion resistant floor protective coating with a slip-resistant finish. INDUFLOORIB3359 has a suitable viscosity which enables achieving a textured or anti-skid finish using appropriate fillers.

Areas of Application:

INDUFLOORIB3359 is typically used in:

  • Food and soft drinks processing areas.
  • Chemical processing plants.
  • Car production and showrooms areas.
  • Pharmaceutical and medicine related facilities.
  • Aircraft hangars and maintenance areas.
  • Warehouses.
  • Schools, hospitals, hotels, offices and commercial buildings.
  • Wet processing and production areas.
  • Commercial kitchens.

Storage:

  • Easy to mix and to apply.
  • Solvent free; odourless.
  • Hygienic; easy to clean.
  • Suitable viscosity, high filler systems, enabling universal applications.
  • Does not support the growth of bacteria or fungus.
  • Excellent abrasion resistance.
  • High chemical resistant.
  • Provides anti-slip finishes in trafficable applications.
  • Durable, seamless and impermeable.
  • Very good mechanical properties.
  • Formulated to be suitable for the tropical and hot climates.

Technical Data

  • Appearance (mixed): Component A is pigmented low viscosity liquid while Component B is clear liquid. Mixed materials are pigmented low viscosity liquid free from impurities.
  • Specific gravity: 1.45 at 20 °C
  • Solid content: 100 % by weight
  • Minimum Application temperature: +5 °C
  • Pot-life: 120 mins at 25 °C and 45 mins at 35 °C
  • Full cure: 7 days at 25 °C
  • Wet & dry thickness: up to 3mm
  • Compressive strength: 70 N/mm2
  • Flexural strength: 45 N/mm2
  • Shore D Hardness: 85
  • Bond strength: >4 (N/mm2)
  • Water Absorption: > 0.06%
  • Chemical Resistance: > INDUFLOORAB3359 has been tested for chemical resistance to a comprehensive range of industrial & domestic chemicals. After constant immersion for 9O days at 35°C in accordance with ASTM D-2240 (Shore D hardness)

Product Details

Product Application:

Surface Preparation

All surfaces must be sound, clean and free from dust, grease, oils, curing agents, mould release agents and other contaminations adversely affecting bond with the substrate. Steel or metal surfaces should be free from rust or scale in accordance with SA 2&2 (white metal finish). All adhesion preventing contaminants should be fully removed.

Product Priming:

Priming

Prior to application of the INDUFLOORIB3359 system, use as appropriate INDUFLOOR-B1 280 or INDUFLOOR-IB1 285

Product Mixing:

Mixing

The following procedure applies to the three surface finishes. However for the textured finish an addition of a thixotropic agent is necessary. For smooth slip-resistant, skid-resistant & first coat only of textured finish: Stir well, each of components A & B [separately] prior to the mixing of the two components. Empty the entire contents of component B into the canister of component A. Using an appropriate drill (RPM approx. 400) attached with an approved mixing paddle, mix the entire contents well for at least 3 minutes until a uniform colour and consistent mix is achieved.